CONCEALED DISPLAY KIT
A big step toward privacy...

Tired of other drivers crowding up behind you so they can live off your detector warnings? Or maybe you just prefer to keep a low profile. Here's a way to move all of V1's visual warnings to a remote location others can't see, but you can.

The Concealed Display Kit (optional) makes Valentine One radar detectors less noticeable to others outside your car. It allows you to operate Valentine One with its lights blacked out, yet have a fully operational display module down low in the car where it's not visible outside.

INSTALLATION: Using Lighter Adapter

1. Slide Lighter Adapter (V1 symbol must be "up") into cavity on back of Concealed Display Module.
2. Connect V1 ACC on Lighter Adapter to Concealed Display with 3-inch cord.
3. Adjust angle on Lighter Adapter, then insert Lighter Adapter into lighter socket.
4. Run the power cord from the Main Unit jack on the Lighter Adapter to Valentine One.
5. To operate, adjust Control Knob and Control Lever on Valentine One to your desired settings.

IMPORTANT NOTE: Do not use Direct-wire Power Adapter with the Lighter Adapter.


Changing the Fuse
Engage a screwdriver in slitted metal tip of lighter adapter, press in, and turn clockwise until metal tip can be removed. Fuse is under metal tip. Use a 1 amp. 5mm x 20mm fuse.

INSTALLATION: Using Dual Lock

1. Slide Dual Lock backplate into position on back of Concealed Display Module.
2. Adhere a square of Dual Lock in the desired mounting location and attach Display Module.
3. Install Direct-Wire Power Adapter (follow instructions in the Owner's Manual).
4. Run a power cord from the modular jack labeled "Accessory" on the Direct-wire Power Adapter to the modular jack on the Display Module.
5. Run a power cord from Modular jack labeled "Main Unit" on the Direct-wire Power Adapter to the Main Unit.
6. To operate, adjust Control Knob and Control Lever on Main Unit to desired settings. Use switch on Display Module to transfer warning lights from Main Unit to Display Module.

IMPORTANT NOTE: Do not use Direct-wire Power Adapter with the Lighter Adapter.

MORE LINKS:
Tech Report 4 - V1 Radar Detector on Motorcycles